The Specs are as follows :-

 Space frame chassis (sq.40mm 1.6 mm) tubing and TIG welded with crumple zones front and rear as well as the sides with side impact bars in tilting doors (forward).

Chassis is galvanized and either powder coated or 2 pack painted. We can supply stainless steel if requested.

It is fitted with a 5lt.V8 ( 308 ) Holden VT engine(NEW) and is fuel injected, with Porche 5 speed transaxle gearbox.( Reconditioned ).

Unequal wishbone suspension front and rear fully adjustable with 28 settings (Hard to soft), coil over shockabsorber (Spax) with Red Back suspension bushes all round.

Ventilated disc brakes , 260mm rotors front and back with brake booster.

 Steering (Not power ass.) 4 full turns lock to lock with tilt steering ( 5 positions) for easy entry.

 All controls on steering column except for ignition and Start button on dash.  Gauges are VDO temp, oil pressure, volt, fuel, speedo and rev counter.

 Fuel tank aluminium 65lt fitted behind cab east x west position.

 Air conditioning std.

 Luggage is in the side pods and small boot which is situated behind engine compartment as well as behind the seats.

 Cooling is a 5 core radiator with a 2 speed single fan

 Body :- Highest quality unstressed GRP , heat resistant and has a gel coat finish. Finished colours are white ,yellow, red, blue and green.

 Body can be finished (final coat) in any colour the customer requests.

 Body sizes :- Height 1,230 mm , Wide 1,980 mm , Length , 4,200 mm. and has a flat bottom which creates a suction effect when cornering at high speed.

 Wheels ;- 18in , 5 stud, chrome with 235x40x18 front and 265x35x18 rear tyres.

 SPEED !! SUFFICIENT...........300klm with present gearing.  Special gears can be manufactured for racing purposes.

 To keep the costs down we will be producing a basic model , an intermediate and  a top of the line model and at present haven't worked out a final price yet.